“Best Mechanic Tools Set” are most important one of technician greatest effects.
The proper use of them makes hard job busy difficult one simple of all auto tools the most valuable and versatile.
Because is men’s own hand but the skill of the hand can increase and its power multiplied to use of an endless variety, therefore, other tools that man has been designing and improving since the beginning of time.
Time needed: 10 minutes.
List of The Best Mechanic Tools Set
- HAMMER
Hammers are not a man’s earliest tools. they have been improved since the day when the stone age man fashioned one by trying a stone to branch tone from a tree.
But they still consist of two principle parts head and handle several of the hammers are used today are as follows.
-Ball peen hammer
-Cross peen hammer
-Straight peen hammer
-Claw hammer
-Sledgehammer
-Mallet hammer
-Soft face plastic hammer
- VICE
A toolmaker hand voice is a small Steel Vice with two jaws not opening parallel to each other but in an arch.
The Other ends of the wise are joined together with a rivet a spring is also placed in between the two pieces so that they can be kept apart also.
-Bench vice
-Leg vice
-Pin voice
-Pipe vice
-Hand vice
-Machine vice
-C-clamp vice
- SCREWDRIVER
A screw-driver is a hand tool that is designed to turn screw The Blade is made of steel attached to one end of which is a wooden or plastic handle.
The other end is flattened to fit the slot in the heads of screws these are made in many sizes and types.
-Phillips screwdriver
-Offset screwdriver
-Ratchet screwdriver
-Watchmaker screwdriver
-Saturated screwdriver
- PLIERS
The word pliers is a plural name of a single tool plier are made in many styles and are used to perform as many different operations.
-Combination pliers
-Longnose pliers
-Round nose pliers
-Side cutting pliers
-Adjustable pliers
-Slip joint pliers
- WRENCHES
A wrench is a tool for turning or twisting nuts or Bolts. it is usually made of steel there are many kinds of wrenches they may consist of a slot,
Sockets pins or movable Jaws for grasping the nut fastened to handle for holding the tool.
-Open-end wrench
-Box wrench
-Ring wrench
-Tubular wrench
-Socket wrench
-Torque wrench
-Adjustable wrench
-Hollow screw wrench
-Pipe wrench
- CHISELS
A chisel is a tool made from hexagon or octagon shape tool Steel of a convenient size for handling one and is Sharp for the cutting operation while the other end is left blunt to receive the blows from a hammer.
Chisels are usually forged to the required shape then annealed, hardened, and tempered. finally, a cutting edge is ground.
-Hot chisel
-Cold chisel
-Half-round chisel
-Diamond Point chisel
-Flat chisel
-Sidecut chisel
- HACKSAW
Two parts of hacksaw are called frame and blade practically all Hacksaw are made with an adjustable frame design to take a blade which are 8, 10, or 12 inches long most frames are made with a pistol grip.
- STUD-EXTRACTOR
A broken screw, bolt, stud may be removed with a stud Extractor a hole is first drilled into the broken Bolt or stud.
It should be a little smaller than the minor diameter of the thread stud Extractor of the proper size is then inserted in the hole the left-hand Spiral of the Extractor will grip
The lights of the whole and as it is turned anticlockwise the Bolt will be backed out to remove broken Bolt or stud from soft metal bodies can be extracted by welding and electrode over it and turning it in the opposite direction and its best mechanic tools set ever.
- FILES
A Mechanic tools kit cannot be considered complete without several files.
The portion of the file on which the teeth are cut is called the face and the tapered and which fits into the handle is called the tang the teeth which do the cutting are set at an angle across the face.
- DRILL BITS
The making of a hole in the peace of material can in some instant be a simple operation but in a machine shop, it is important and resizes job a large number of different tools.
And machines have been designed so that whole may be made speedily economically and accurately in all kinds of material the most common tool for making a hole in the drill.
- REAMERS
The hole that has been made by the drill is seldom accurate in size it is usually slightly oversize this is quite satisfactory for holes in which bolts or rivets are placed.
When greater accuracy and a smooth finish are required the hole is first drilled undersize and then finished by remaining the river is inserted into the spindle of the machine in the same manner as a drill.
- THREADS
Thread and screw play is one of The Best mechanic tools in a car workshop.
Most of the screw and nuts that are used in the assembling of tools and machines manufactured on a mass production base.
But the technician is frequently required to make both standard and special screw and matching parts there are many varieties of screw thread each one design for a specific type of work.
- TAPS
“Tap” is a cylindrical bar of Steel with thread form around it and grooves or flutes running lengthwise intersecting with thread to form cutting-edge.
It is used to cut internal trade a set of taps consists of three taps known as taper plug and bottoming tape.
- DIE
Threading “Die” is a flat piece of hardened Steel internal threaded with grooves or flutes intersecting the thread to form the cutting edge.
It is used for cutting external thread on the round bar on metal in earlier days some solid dies were used however later on the die is split on one side.
- SCRAPER
Precision machines do an excellent job in producing surfaces that is accurate in measurement and smooth in Finnish.
However, there is some operation such as the fitting of bearing surface that is better done by skillful handwork scraper are used for this work in automobile workshop bearing of crankshaft cylinder liners are sometimes required to be scraped precisely.
We hope readers can understand this “Best Mechanic Tools Set for Car Beginners” article and do it practically with them.
Read this:- The procedure of Preventive Maintenance in Automobile Industry
Read this:- How To Brake Fluid Change By Your Self – With Picture
Visit site:- www.carsuffer.com